Quick Answer: What Does A Blown Sub Sound Like?

What happens when a subwoofer blows?

Subwoofers are most commonly blown by supplying too much signal to the car audio amplifier.

The result is a “clipped” signal and this can damage the amplifier and subwoofer.

A subwoofer can be heavily damaged by a sustained clipping.

You’ll know a clipping sub when it suddenly sounds very odd and loud..

Should I hear sound from my subwoofer?

Is sound supposed to come out of a subwoofer? Only if it is on, and the volume up. Subs are speakers, so, yes, they will produce sound when there is something within their bandwidth to be played.

Why does my sub cut out when I turn it up?

This is almost certainly an electrical problem like a ground. Any stock electrical system should power that amp no problem so if you’re dropping to 9 then the wiring isn’t right somewhere or less likely is that something is wrong with the amp.

Do blown speakers still work?

When someone says that a speaker is blown out, they basically just mean that the speaker has suffered some kind of catastrophic failure. The speaker may not work at all, or it may sound really bad. … When a car speaker is just partially blown, you’ll usually still get sound from them, but the sound will be distorted.

How do I know if my sub is blown?

Pressing on the subwoofer can indicate whether it’s blown. A functioning subwoofer has suspension that allows for movement. Use both hands and gently press on either side of the subwoofer’s speaker cone. If the cone is rigid or locked in place, the subwoofer is definitely blown.

Can you fix a blown subwoofer?

To fix your blown subwoofer you’ll need to take it out of your car, fix or replace any damaged parts, and glue/wire it back together. This process can range from easy to very difficult, depending on the problem.

Why is my sub making a rattling noise?

Overpowered Subwoofer Each subwoofer comes with a certain rating. This defines how much power it can handle. If you turn the volume up too much, it might start to distort the sound. The result may be a rattling sound inside the sub.

What makes a subwoofer pop?

Pop: A clipped signal tries to move the cone too quickly Nothing travels that fast, and the sub either tears itself apart trying, or the flapping cone wobbles just enough to jam the coil in the magnet’s voice coil gap, killing the sub.

Why does my subwoofer have no sound?

There is no sound from an active subwoofer connected to the television. … Ensure the subwoofer is connected to the MIX or SUB output on the stereo system or TV. Ensure the power cord of the subwoofer is connected to a working AC outlet. Turn on the subwoofer.

Why would a subwoofer stop working?

The most common cause of speaker failure is short-circuiting. A short circuit in the wires providing the signal will prevent the signal from ever reaching the subwoofer. A short circuit at the terminals on the subwoofer will also prevent electrical current and signal from reaching the subwoofer.

Do subwoofers get louder as they break in?

Subwoofers should not get louder as they break-in. Instead, they will adjust to the varying frequencies provided and will most effectively play the sounds that are coming through.

How do you check for a blown speaker?

Turn on your vehicle’s radio, and turn up the volume. Listen for any distortion in sound quality, such as a hissing sound. If a speaker is blown, the distortion should increase as you turn up the volume. Listen to each of your speakers to determine which of them are blown.

Will a blown speaker make any sound?

If a speaker is completely blown, it will likely not produce any sound and may just make a soft hissing or ringing sound instead. … Therefore, you should listen to the speaker at a range of different volumes to determine if the distortion remains constant or if it seems to worsen.

How do you troubleshoot a subwoofer?

Troubleshooting Your Subwoofer No Output Check that all components are plugged in and turned on. Check all interconnecting cables. Check that the subwoofer is connected to the sub out (or other appropriate output) on the receiver/processor/amplifier. Check that subwoofer output is enabled in the receiver/processor’s…

Can you fix a rattling speaker?

Conclusion. Speaker rattle is annoying, and sometimes it can be the sign of something bad. But in most cases, it’s a simple fix that you can easily do yourself. In more extreme cases, you may have to return the speaker (if they are new) or purchase a replacement.

How do I stop my speakers from blowing?

AV Tip: How to Avoid Blowing Out Your SpeakersIn a multi-channel system employing a powered subwoofer, set ALL of your speakers to “small” in the receiver setup menu and set the crossover frequency a little higher than manufacturer recommendations (we usually recommend 80Hz). … Keep the volume on your receiver at least 5-6dB below its max setting.More items…•